12Vdc constant, 30W, IP20, 101x40x20mm
Price plus VAT, plus shipping cost
| Menge | Preis |
| 1 - 4 | 6,99€ |
| 5 - 9 | 6,79€ |
| 10 - 19 | 6,59€ |
| 20 + | 6,39€ |
LS-30V12P
6,99€
Out of stock
Out of stock
Description
LED driver 12V 30W constant voltage for LED strip Lamp flickerfree Furniture installation LED power supply transformator
LS-30V12P
LED power supply for 12 Vdc constant voltage
2.5 A (30 W) max., IP20, independent installation, non-dimmable
Flicker free according to IEEE 1789
Electrical Data
| Input voltage (nominal) | 220…240 Vac |
| Input voltage (range) | 198…264 Vac |
| Mains Frequency | 50/60 Hz |
| Power Factor (λ) | >0.96 |
| Input Current | 0.2 A max. |
| No-load loss | ≤0.5 W |
| Inrush Current | 20 A max. |
| Output Voltage | 12 Vdc |
| Output Current | 0…2.5 A |
| Output Power (nominal) | 30 W max. |
| Efficiency | ≥ 90,5 % |
| Life Time | > 50,000 h |
| Dimmable | No |
LED driver 12V 30W constant voltage for LED strip Lamp flickerfree Furniture installation LED power supply transformator
Operating Condition
| Operating Ambient Temperature (ta) | -20…+45 °C |
| Max. Surface Temperature (tc) | 80 °C |
| Permitted rel. Humidity | 5…85 % |
| Protection Class | II |
| Type of Protection | IP20 |
Protection
| Short Circuit Protection | Yes * |
| Overload Protection | Yes * |
| Overvoltage protection | Yes * |
| Overheating protection | Yes * |
(*) The output shuts off and will be resumed, after problem is removed and led driver is restarted.
Standards & Certificates
| Standards | EN 61347-1, EN 61347-2-13 EN 61547, EN 55015, EN 62493 EN 61000-3-2, EN 61000-3-3 |
| Approval Marks | CE, UKCA |
| RoHS Compliant | Yes |
LED driver 12V 30W constant voltage for LED strip Lamp flickerfree Furniture installation LED power supply transformator
Installation
| Type of Installation | Independent installation |
| Type of Connection | Screw terminal |
| Cable Cross-section, input side | 0.5…1.5 mm² |
| Cable Cross-section, output side | 0.5…1.5 mm² |
| Cable Preparation length, input side | 6.0 mm |
| Cable Preparation length, output side | 6.0 mm |
Dimension
Connection
LED power supply LS-30V12P: LED transformer constant voltage, input 220 – 240 V (AC), output 12 V (DC), not dimmable, flicker-free, independent installation.
Power: Ideal for LEDs (strips, lamps, GU5,3 / MR16, G4 / MR11) up to 30 W, parallel connection possible. Our products can be used with full load.
Flicker-free: flicker-free light source provides better eye protection and guarantees high-quality video recording.
Assembly: dimensions 101 x 40 x 20 mm (L x W x H), ambient temperature (ta) -20 – +45 °C. Connection by spring loaded clamps, suitable for furniture installation.
Safety: Protection class IP20, protection device overload protection, surge protection, short circuit protection and overtemperature protection.
Quality: CE, furniture approval; Service life > 30.000 hours; Surface temperature (tc) 75°C.
huatec led transformer power supply driver transformator 12v 12 volt dc constant voltage same voltage flicker-free 30w 30 watt led strip lamp gu5.3 mr16 g4 mr11
LED transformer 12V 30W constant voltage
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet